BUMPER PULL COMPATIBLE STEEL FRAME KITS
or design a custom kit to match your own personal style.
"So, what do these kits come with?"
All Tiny House Foundations steel frame kits are offered in two package levels: starter and complete. While each kit has it’s own style, the contents for both package levels are the same. Check them out below!
Starter Kit Contents
The Starter Kit is the perfect place to begin and was designed with the first time DIY'er in mind. It includes all the parts needed to assemble your tiny house including:
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
Complete Kit Contents
The Complete Kit is the ultimate package designed for the DIY’er in mind. It includes all the parts needed to finish your tiny house build. Each Complete Kit contains all of the Starter Kit components shown to the left, plus:
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The NIXIE"
-
20' Nixie Starter Kit $18,231.53
-
20' Nixie COMPLETE Kit Contact
This is a product with customization ability. We require input from the buyer in order to price. Please call email us (hello@tinyhousefoundations.com) to schedule a quick call about your build.
20′
"The Little Zen"
20′
"Nooga BLue Sky"
-
20' Nooga Starter Kit $18,231.53
-
24' Nooga Starter Kit $20,479.66
-
28' Nooga Starter Kit $24,187.04
-
Nooga COMPLETE Kit Contact
This is a product with customization ability. We require input from the buyer in order to price. Please call email us (hello@tinyhousefoundations.com) to schedule a quick call about your build.
20′
24′
28′
"The Jimmy"
-
20' Jimmy Starter Kit $18,231.53
-
24' Jimmy Starter Kit $20,307.36
-
28' Jimmy Starter Kit $24,187.04
-
Jimmy COMPLETE Kit Contact
This is a product with customization ability. We require input from the buyer in order to price. Please call email us (hello@tinyhousefoundations.com) to schedule a quick call about your build.
20′
24′
28′
"THE SPRINGS"
-
20' Springs Starter Kit $18,231.53
-
24' Springs Starter Kit $20,307.36
-
28' Springs Starter Kit $24,187.04
-
Springs COMPLETE Kit Contact
This is a product with customization ability. We require input from the buyer in order to price. Please call email us (hello@tinyhousefoundations.com) to schedule a quick call about your build.
20′
Coming Soon24′
28′
Coming Soon"THE WEDGE"
-
20' Wedge Starter Kit $18,231.53
-
24' Wedge Starter Kit $20,307.36
-
28' Wedge Starter Kit $24,187.04
-
Wedge COMPLETE Kit Contact
This is a product with customization ability. We require input from the buyer in order to price. Please call email us (hello@tinyhousefoundations.com) to schedule a quick call about your build.
20′
24′
28′
Coming Soon"THE CHANTEY"
-
20' Chantey Starter Kit $18,231.53
-
24' Chantey Starter Kit $20,307.36
-
28' Chantey Starter Kit $24,187.04
-
Chantey COMPLETE Kit Contact
This is a product with customization ability. We require input from the buyer in order to price. Please call email us (hello@tinyhousefoundations.com) to schedule a quick call about your build.