Gooseneck STEEL FRAME KITS
or design a custom kit to match your personal style.
"The Panorama"
20′
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The BREWMASTER"
This is Modal Title
35′
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The Huntsman"
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The Upper Deck"
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"THE Benton"
33′
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The Lookout"
33′
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The MINI MAISON"
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"Off Grid Cali"

- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The Colorado"
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
"The View"
- Comes with a 25-year warranty Certificate
- ICC/ IRC Certification
- Panel assembly guide
- Final frame drawings
- Simpson Straps/Plates (as required by project):
- LTS12 Twist Strap
- LSTA36 Strap Tie
- Simpson Flat Plate
- Simpson Joist Hangers
- Ridge-Beam Splice Brackets (if needed)
- Electrical Grommets
- 12” Extension bit
- Gloves
- All Necessary fasteners and bits (ie screws, See Hardware)
- Simpson HTT4 Hold down brackets (used for mounting the frame to the trailer)
- 5/8” Nuts, Bolts, Washers, and Lock Washers
- 5/8” Drill Bit
- Sill Gasket
- All Necessary fasteners and bits (ie screws, See Hardware)
- Exterior walls – 1” R3.6 – Zipwall sheathing.
- Roof – 5/8” Zipwall Sheathing
- Zip System Seam Tape
- ¾” Advantech Subflooring
- All necessary fasteners and Bits (ie screws, See Hardware)
- All tube mainframe
- Structural fenders
- Tongue jack
- Corner jacks
- Adjustable coupler
- Safety chains
- Dot stickers and lighting
- Brake away kit
- Belly pan installed
- 16” OC crossmembers
We currently working on a complete kit that can be dropped shipped, in phases, directly to your location. At this time, total costs involved in the Complete Kit will be estimated on a per build basis. Contact us for your Complete Kit quote.
- Exterior siding and trim parts
- Roofing materials
- Windows, Doors and Door Locks
- Exterior finishing such as sealants, and painting products
- All rough-in and finish plumbing parts (Should be installed by a professional)
- All rough-in and finish electrical parts (Should be installed by a professional)
- Propane setup – two (2) 30 lb. propane tanks, dual stage valve, propane connect lines, and mounting brackets. Final appliance connections should be completed by a professional with copper and flared fittings and then, tested. Due to the custom nature of the unit, the propane hard pipe will need to done on-site.
- Mini split system. Choice of 9K, 12K, and 18K dual zone units. (line sets, communication cable and drain line will need to be install by a professional as well as the final connections)
- Interior wall insulation options. Spray foam kit or Roxul R-15 batts.
- Interior wall surface
- Interior trim
- Flooring
- Kitchen cabinets (with stock layout or materials for construction if it’s a custom layout)
- Counter tops and choice of sink
- Appliance Package such as refrigerator, washer/dryer combo unit, on demand propane water heater, choice of propane cooktop/oven, microwave hood vent, and Lunos e2 fresh air exchangers
- All necessary fasteners
- Interior finishing products such as paints and stains
- Safety products such as smoke detector, fire extinguisher and LP/carbon monoxide detector.
